what is ip camera activation


what is ip camera activation插图

thetechnicianspot.comImage: thetechnicianspot.comWhen the DVR/NVR/IPcamera is doing the first time setup,it required the Activation. There are two ways to activate your device,from the local monitor screen or from the computer. Activate from the Local Monitor. a. Follow the Setup Wizard,you can finish the activation. If playback doesn't begin shortly,try restarting your device.

What is an IP camera?

It is an abbreviation for an Internet Protocol Camera, which also means a digital video camera similar to a webcam, designed to transmit and receive data over a local network or the Internet. A standalone IP camera has its IP address. It needs a network connection to transfer images.

How to activate the IP camera on the network?

or click Menu Camera Camera to enter the IP camera management interface. Note: For the IP camera detected online in the same network segment, the Security status shows whether it is Active or Inactive. Click the inactive icon of the camera to enter the following interface to activate it.

How to change the IP address of an IP camera?

The first step to the process is to change the PC network settings to a 192.168.1.xxx network address temporarily. This step allows a user to access the IP camera to change it’s IP address to a compatible IP address for their main network. The main network is the network scheme that was found by using the Command Prompt.

How do Internet protocol cameras work?

Internet Protocol cameras, also called IP cameras or network cameras, provide digital video surveillance by sending and receiving footage over the internet or local area network (LAN). Like their name suggests, IP cameras connect to a network through WiFi or a Power over Ethernet (PoE) cable.

What is an IP camera?

What is IP camera? It is an abbreviation for an Internet Protocol Camera, which also means a digital video camera similar to a webcam, designed to transmit and receive data over a local network or the Internet. A standalone IP camera has its IP address. It needs a network connection to transfer images.

What is the connection of IP cameras?

Connecting an IP camera to a network is similar to connecting other network devices such as a computer, a printer, or a tablet.

Is an IP camera a security camera?

IP Cameras are a versatile security solution. While analog cameras connected using coaxial cables to a digital video recorder also require wired electricity. IP cameras can work standalone as a temporary or permanent solution. All Camius IP cameras are PoE enabled, allowing them to power over a network using a single ethernet wire.

Does a Camius camera need WiFi?

Camius PoE IP camera installed with a Camius PoE NVR – 8 or 16 channel – is one of the best and easiest setups that don’t require a complicated network configuration. Camius PoE NVR automatically assigns an IP address to the IP camera.

Does Camius need a network?

It needs a network connection to transfer images. Connecting an IP camera to a network is not similar to connecting other network devices such as a computer, a printer, or a tablet. Camius offers a wide IP camera range which can be found here.

What is the password for Hikvision?

In earlier versions of the firmware (to version 5.3.0) IP cameras HIKVISION supplied to IP address 192.0.0.64 and the default password is 12345.

How to set up a camera on a computer?

The first method is to activate and connect IP camera. Connect the camera to the computer network adapter, change network settings so that the adapter and the camera were the same subnet. Open a browser and enter the IP address of the camera. If the IP address is entered correctly, the window for setting password: ...

How to find the IP address of a camera?

1) Look at the sticker (label) on the box from the camera , indicating the firmware version and default IP address of the camera.

How many characters are in a password?

The password must be “strong”, that have 8 to 16 characters and consist of at least two types of characters are listed above.

What is an Internet Protocol (IP) Camera?

Internet Protocol cameras, also called IP cameras or network cameras, provide digital video surveillance by sending and receiving footage over the internet or local area network (LAN). Like their name suggests, IP cameras connect to a network through WiFi or a Power over Ethernet (PoE) cable. They’re often used with network video recorders ( NVRs) and sometimes digital video recorders ( DVRs ), making them a common solution for enterprise video surveillance.

How much bandwidth does an IP camera use?

Steady State Streaming: IP cameras that operate in “steady state” consume significantly less bandwidth, making them more scalable and less costly for enterprises and large organizations. In steady state, cameras send a constant stream of encrypted thumbnails and related metadata to the cloud once every 20 seconds. A steady state IP camera operates at about 20 kbps, which is roughly 1 ? 100 of a traditional cloud camera that streams at 1-2 mbps. Given the low bandwidth footprint, over 100 steady state cameras can share the same network connection and consume the same bandwidth as one traditional cloud camera.

What is fixed IP camera?

Fixed IP Camera: Fixed IP cameras operate in a static position and provide a single view within the camera’s field of vision, continuously surveilling subjects within a predetermined frame. Fixed cameras are widely used both outdoors and indoors, typically in retail stores and business offices. Compared to PTZ cameras, they require less bandwidth to support.

How much electricity does a PoE+ system use?

Standard PoE systems power most IP cameras and transmit up to 15 watts of electricity. PoE+ systems transmit up to 30 watts and are usually used in more high-power cameras with their own heating and cooling mechanisms.

What is a PTZ camera?

PTZ IP Camera: Pan-tilt-zoom (PTZ) cameras can adjust their field of view and angle via a remote operator, allowing users to track events with greater control. They can cover potentially large areas and are commonly used to monitor public outdoor spaces.

What is at rest encryption?

At Rest Encryption: Data encrypted “at rest” means data is protected while on the camera. RSA and AES are two examples of Public Key Infrastructure (PKI) encryption standards, which ensure that anyone who accesses video data won’t be able to extract it from onboard storage.

Why are IP cameras better than analog cameras?

Because they transmit digital signals, they are able to capture greater detail. This makes it possible for many IP security systems to incorporate advanced video analytics like facial matching into their software.

What is the difference between a DVR and a NVR?

It is similar to a DVR, but while a traditional DVR is responsible for encoding and processing video from component cameras, an NVR depends on the cameras to encode their video, simply storing it and allowing for centralized remote viewing.

What is a PTZ camera?

PTZ is an acronym for pan, tilt and zoom. A PTZ camera can be viewed and controlled by multiple users just like a standard network camera, but has the added ability to be moved remotely. Unlike a traditional fixed camera, a PTZ allows a user to adjust the camera's view as necessary.

Why do wireless networks use a router?

Wireless networks use a WiFi router to transmit data to and from a wired modem. They transmit data at a slower rate than a wired network, and are at increased vulnerability to unauthorized access, though this can be mitigated through the use of encryption. The decreased security is balanced by the ease of setup and customization of a wireless network.

How does an internet camera work?

Instead of transmitting video over a video cable to a monitor or DVR, an internet camera transmits digital video over a data connection: ethernet , USB , WiFi, etc. Everything required to transfer images over the network is built into the unit. It is connected directly to the network, just like any other network device, like a printer or scanner. Depending on what type of camera it is, it may save video to an attached memory source, connect to another device on the network for storage, or stream captured video to the internet.

Why do detailed images require more space on a hard disk?

Detailed images require more space on a hard disk and more bandwidth for transmission. To transmit images over a network, data must be compressed to avoid consuming too much bandwidth. If bandwidth is limited, lowering the frame rate or accepting a lower image quality can radically reduce the size of video files.

What is an internet cam?

Whatever you choose to call it, an internet cam is a camera that sends and receives data over a local area network (LAN) and/or the internet.

What type of cable is used for security?

There are three types of networks in common use for security applications: Wired networks will connect to a broadband modem or router through ethernet cables (RJ45, CAT5, CAT6). These are the fastest and most secure way to connect, removing the chance of signal interception and interference.

Who is this article for?

As we mentioned in the introduction this article is really for two types of people who are trying to do either of the following:

What type of cable is used to connect IP cameras to a network?

An Ethernet cable - CAT5e or CAT6 are what we recommend - the cable is used to connect the IP camera to a network.

How to add a camera to a NVR?

To add the camera to an NVR over the network use the Camera Registration screen on the NVR. Search the network for the camera and click the “Add” button. Or add a manual entry using the username, password and IP address that was set on the camera.

How to connect IP camera to Ethernet?

1e) Right click the Ethernet or WiFi connection for the network that the IP camera is connected to and click “Properties”. 1f) Click to highlight the item “Internet Protocol Version 4 (TCP/IPv4) and click the Properties option below the item list.

What is the default IP address for a camera?

The default IP address set on our cameras from the factory is 192.168.1.109. If the network a person is trying to connect a camera to is not 192.168.1.xxx compatible then the camera cannot communicate on that network. This article does not intend to teach someone about what an IP address is, or how to do advanced networking; it is a step by step guide to setting a camera up on a network.

How to power a camera?

Provide power to the camera - A camera can be powered using any one of three ways: PoE Injector - Use two cables - One to provide power and data, the other to connect to a network. PoE Switch - Connect and power multiple cameras - Use the uplink port and Ethernet cables to connect cameras to a network router.

What does the computer icon look like?

If the computer is wired into the network the icon should look like a monitor with an Ethernet cable. If the computer is a laptop or tablet the icon will look like WiFi bars.

What is ONVIF conformant camera?

An average user may only need to know that ONVIF is an international standard. An ONVIF conformant camera offers the maximum compatibility and interoperability with many software and hardware on the market. Generally speaking, ONVIF conformant cameras have more features and better quality than traditional non-ONVIF network cameras.

Why do cameras use one port?

All network cameras of major brands use one port for everything - Web UI, ONVIF services, RTSP and snapshot because they use only one transport protocol - HTTP. They support RTSP over HTTP. Some cameras, especially many made in Shenzhen, China require up to three ports - one port for web UI and maybe snapshot, one port ONVIF services, and one port for RTSP.

Why do Axis cameras require users?

web UI, proprietary API). It is critical to add users for ONVIF services because these cameras have no users for ONVIF services by default. The following figure shows how to add ONVIF users.

What is LAN camera?

A LAN is often the home network of a consumer. Plug an Ethernet cable (a.k.a. Cat 5 cable) into the Ethernet socket of the network camera, then plug the other end to the router (a.k.a. gateway or access point). If this network camera does not have Wi-Fi, this may be the only step needed for the network configuration.

How to access a device on a network?

The only way to access a computing device on a network is through its IP address and ports. If there is only one network camera on a LAN, we can ask the router to forward everything to the camera, and everything will be the same as accessing the camera on the LAN except using the public IP address of the router.

What is the IP address of a camera?

The IP address of a network camera is a private IP. The most common range is 192.168.0.0 - 192.168.255.255, followed by 10.0.0.0 - 10.255.255.255. They are least likely in the private IP range of 172.16.0.0 - 172.31.255.255. Private IPs are good for a LAN. It is like that a street address "101 5th Avenue" is good for locating a home in a city, but you cannot use it to locate a home in another city because every city may have "101 5th Avenue". Every LAN may have a device using a private IP address such as 192.168.0.101.

How long does it take to set up a camera?

Many apps have automated the setup process to a great degree, and it usually takes less than 1 minute to set up a camera before starting enjoying its video.