how to view security cameras on multiple tvs


how to view security cameras on multiple tvs插图

How to view security cameras on smart TV?

How to view security cameras on Smart TV can be done in four easy steps: 1 Connect your CCTV cameras to the NVR using Ethernet Cat 5/6 cables. 2 Using your HDMI cable, connect the security camera NVR to TV. 3 Turn on your NVR with the power adapter. 4 Turn on your smart TV, and the live view will be displayed on the screen.

How to connect CCTV cameras to TV?

Specifically, only 4 steps are needed to connect cameras to TV: Connect CCTV cameras to the NVR with Ethernet Cat 5/6 cables. Connect the security camera NVR to TV with the HDMI cable. Power the NVR with the power adapter. Turn on the TV, and the live view will be shown on the screen.

How many monitors can be connected to a security camera receiver?

Standard HDMI cables are used to connect each receiver to a TV. Now, each of these 4 monitors will display a live video feed from the security camera. This system can be used to send HDMI video over CAT6 to up to 4 monitors.

Can I display my security cameras on multiple TVs without HDMI?

The result is that users can now display their security cameras on multiple TVs without running cumbersome HDMI cable. You can learn more about the products used in the above diagram on these web pages.

How to connect satellite receiver to TV?

Connecting the Satellite Receiver is very simple, on Illustration 5 connect SAT Cable from the first diplexer we already installed to the top in/out ‘A” on the diplexer after that connection is made connect the antenna to the TV in/out on the diplexer “C” and finally connect “B” Sat in/out to the Sat in on the Satellite receiver.

How to scan local channels on a satellite receiver?

Power up your Satellite Receiver and go to the Menu by pressing the menu button in your remote then select option 6 which is “System Setup” , go to option 8 “local Channels” on the new window select local channels , select “Scan Locals” your receiver will now scan your local channels , the local channels that the receiver found will not be displayed on the left of the screen. You can highlight each channels to see the channel strength after that you can hit “DONE”, then you can press “CANCEL” twice to exit the menu, finally go into your guide and search the channel that the RF Modulator is on, Channel 65 or a channel that is not being used by any station is required since those channels will cause interference.

Does the Y splitter adapter work on a DVR?

Setting up your Adapter. Adapter is optional and it will only work in single channel mode, meaning one channel has to be in full screen for that one channel Adapter to work unless the Adapter is tapped from the microphone to the DVR using a ”Y” splitter Adapter cable.

Can you see all cameras on a RF module?

Once you have selected the channel in your RF Modulator and tuned into the same channel in your TV you should see all your cameras in that channel as well as Adapter only if you have installed the optional Adapter splitter or selected the Adapter out from your DVR.

Does a dish network have an antenna?

Note* this is for Dish Network System. Some Satellite systems have a switch that has an Antenna input if you are able to provide power and install the RF modulator in a weatherproof box you can do so without the need to add 2x Diplexers for each TV. Consult with your system manual. Illustration 6 shows this type of connection.

Is it easier to set up a satellite or cable TV?

Setting up your Cable TV system is much easier than setting up a satellite system with your DVR and RF Modulator.

Illustration 8: Home Network

Notice in Illustration 8 we have a structured network, both Ethernet cable and Coaxial Cables are run to this Distribution box.
In this system we will have a Comcast Cable modem find the cable that goes from the outside to the 2 way splitter that is giving the modem it separate connection , lets tap into the 2 way splitter by adding a short cable from the 2 way splitter to the aerial in on the RF Modulator see Illustration 10 the one marked 2 and connect the TV/VCR “OUT” to the TV’s or cable boxes add your power to the RF Modulator and Video and Adapter if you have added the Adapter connections or settings in your Camera DVR .

Illustration 10: RF Modulator

Once you have made these connections , you can now connect into the RF in on your Cable TV setup box in this case we will be using a Comcast Xfinity setup box on a X1 Platform.

Related Posts

Infrared and Night Vision Cameras Hey everyone, SCK here with an awesome article talking some frequently asked questions and info on Infrared and Night Vision cameras. As we all know, CCTV or closed-circuit television is...

What does the green line on a DVR transmitter mean?

The green line with the circle represents the IR transmitter. It sends the remote control signal to the IR input of the DVR (wirelessly). Please note that the IR transmitter must have a direct line of sight to the IR input sensor of the DVR.

What is a cat6 cable?

Please note that this system does not use an IP network. It is just using Cat6 cable to transmit the HDMI signal directly . The Cat6 cable transmits the HDMI and IR remote control signals. The Cat-6 also supplies power to the receiver units from the transmitter (similar to power over Ethernet).

What is the red line on a DVR?

The red lines are standard HDMI cables. The one on the bottom of the diagram connects the video output of our iDVR-PRO surveillance DVR to a 1×2 HDMI to Cat6 splitter. The other 2 HDMI cables connect each receiver unit of the HDMI over Cat6 system to the HDMI input of a TV.

What does the purple line on the DVR remote mean?

The purple lines with the circles on the ends represent the infrared receivers that are used to capture signals from wireless remote controls. These are included but optional to use. They allows users to control their DVR from the monitor locations using the standard IR remote included with the DVR.

Can I use HDMI over Cat6?

This article explains how to use an HDMI over Cat6 cabling system to view security cameras and control surveillance DVRs from multiple TVs. In addition to acting as an HDMI to Cat6 splitter, the system also supports IR remote control transmission back to the DVR. This allows you not only to display your cameras in multiple rooms, but also control all functions of the DVR using the wireless remote control.

Who is Mike Haldas?

Mike Haldas is the co-founder and managing partner of CCTV Camera Pros. Mike works on product research and development for the company. Before starting CCTV Camera Pros, Mike worked as a software engineer in the web hosting industry. CCTV Camera Pros is a veteran owned business as Mike proudly served in the United States Marine Corps (USMC) from 1993 to 1997. Mike can be contacted for questions about this article and anything related to video surveillance systems at [email protected] .

Can I use a security camera on multiple TVs?

The result is that users can now display their security cameras on multiple TVs without running cumbersome HD MI cable.

What is a 4 port HDMI?

I am using a 4 port HDMI-TX4 in this example. The HDMI-TX4 not only acts as a 4 port HDMI splitter, it also lets you transmit HDMI signals over CAT6 cable to each TV. This is much more convenient than HDMI cable. You can use these pre-made CAT6 patch cables.

What is RG59 patch cable?

These pre-made RG59 patch cables are used to connect the camera to the BNC video input of the AHD-CV7. These cables already have BNC males connectors on each end which makes them a plug-n-play solution for the BNC female output of the camera and BNC female video input on the AHD video converter.

How many monitors can I use with HDMI?

This system can be used to send HDMI video over CAT6 to up to 4 monitors. You can use just one or two monitors if that is all you need. Additional receivers and monitors can be added at any time (up to 4).

Can you use HDMI on more than one monitor?

In order to display the live video on more than one monitor, an HDMI to video splitter is also needed. The HDMI output of the video converter is connected to the HDMI input of the HDMI over CAT6 system. I am using a 4 port HDMI-TX4 in this example. The HDMI-TX4 not only acts as a 4 port HDMI splitter, it also lets you transmit HDMI signals ...

Does a CAT6 cable need a power supply?

One the TV end of each CAT6 cable run, there is an HDMI over CAT6 video receiver. These convert the video signal from CAT6 back to HDMI. The HDMI receivers do not require a power supply. Power is supplied by the transmitter over the CAT6 cable. Standard HDMI cables are used to connect each receiver to a TV. Now, each of these 4 monitors will ...

Who is Mike Haldas?

Mike Haldas is the co-founder and managing partner of CCTV Camera Pros. Mike works on product research and development for the company. Before starting CCTV Camera Pros, Mike worked as a software engineer in the web hosting industry. CCTV Camera Pros is a veteran owned business as Mike proudly served in the United States Marine Corps (USMC) from 1993 to 1997. Mike can be contacted for questions about this article and anything related to video surveillance systems at [email protected] .

Does a 1080p security camera work?

Please note that although I use an HD-Q7 security camera in the above diagram, any of these 1080p AHD security cameras will work.

Method2: Set up a DLNA server on PC to stream videos on TV

Another way to View Security Cameras on TV is by setting up a DLNA server on your desktop PC and watching IP footage on a DLNA-supported TV.

Method4: Pick Smart TVs and Download Streaming Apps

According to customers’ opinion, View Security Cameras on TV is easier than installing them, especially if you have a Smart TV screen.

Method5: View Security Cameras on TV Using Google Chromecast

Another solution to view security cameras on TV is by using Google Chromecast Streaming Device.