how to use hero 2 camera


how to use hero 2 camera插图

To turn on the camera,press and hold the Mode buttonto the left of the lens. Use the Mode button to swap different modes. To begin filming, make sure you are in Video mode and then press the Shutter button at the top of the camera.

What is the GoPro Hero 2?

The GoPro Hero 2 from GoPro Inc. is a compact digital camera used for action sports travel photography released in October 2011. Key features include [email protected] FPS video, a 2x sharper glass lens, and 10 photos per second burst. Move your cursor so the top navigation menu appears

How do I connect my GoPro camera to my webcam?

Open your webcam application and select GoPro Camera as your preferred camera ( see below for supported programs ). If the app is already open, you might need to quit and restart that application for the GoPro Camera option to be visible. 2. The camera will go into GoPro Webcam mode as shown below. 3.

How do I connect the HD HERO2 camera to my TV?

If you are having problems achieving smooth playback on your computer, the HD HERO2camera can also plug directly into a High Definition TV with an HDMI port using a mini-HDMI cable or via composite cable (not included). The HD HERO2camera itself provides very smooth playback on an HDTV.

What is the battery life of the HD HERO2?

Fully charged, the HD HERO2’s battery will provide approximately 2.5 hours of video recording time in 720p30. The LCD displays the battery meter in every camera mode so that you can monitor how much power remains in the battery.

What is the difference between 5MP and 11MP?

If you think your SD card will fill up before you are able to transfer your files, select the 5MP option under the Photo settings menu. 5MP files are smaller than 11MP files, allowing your SD card to store more photos. ? See pHoto REsolution moDEs for more information. UsInG yoUr HD Hero2: caMera MoDes UsInG yoUr HD Hero2: caMera MoDes

How many times can you capture a moment in burst mode?

Compared to single Photo Mode, Burst Mode gives you 10 times as many chances to capture that “can’t miss” moment.

How many times does the camera beep?

Press and release . The camera will beep once and the LED Recording Light will flash once to indicate a photo has been taken.

What is one button mode?

In One Button Mode, the camera is either “on and recording” or powered OFF. This simplifies camera operation when loaning the camera to a friend or when you know you only want to shoot in one mode. ONE BUTTON MODE (CONT’D ):

How often does Time lApse take a photo?

timE lApsETake a photo every 0.5, 1, 2, 5, 10, 30, and 60 seconds

What is a wide angle 1280x720?

wide angle 1280x720For mounting on vehicles or gear when a max side-to-side wide angle is desired but vertical viewing area is not as important.

How many times does the Buzzer flash?

Press and release . The LED Recording Light on the front of the camera will flash three times and the Buzzer will emit three short beeps.

Step 1: Before We Start

Before we start:
-Make sure the battery is in the camera and charged.
-Put on the housing (the housing lens affects the image, so if it's not on your image may look distorted)

Step 3: Configure

To configure:
1.turn on the camera.
2.it will turn on in video mode (default)
3.press the front button ONCE to start navigating between modes.
4.Continue pressing ONCE untill you see "SET" on the screen.
5. when you see "SET" on the screen, press the TOP button.
6. then you will see"onF" on the screen, press front ONCE again.
7.

Step 4: Shoot Pictures Every X Seconds

to shoot pictures every X seconds, go to settings (step 3 up untill number 8) and select "P".
then, simply click the front button untill you see "P Xnumber" on the screen, the X number means how many seconds will pass between photos.
Thats all you need to configure for photos.
then, to shoot them, turn on the camera, press the front button untill you see a small camera icon blinking on the top left corner of the screen..

Step 5: Shoot Video

To shoot video, simply turn on the camera (wich will turn on in video monde (default)) and press the top button once to start recording, and once again to stop. the numbres on the screen display the number of files on the SD card.
to change the resolution, go to settings (follow Step 3 up to number 8) and press "F" to enter video settings.

Step 6: Shoot 1 Picture Every Click

to shoot only 1 picture, turn on the camera, navigate with the front button untill you see a small non-blinkin camera icon on the top left corner of the screen.

What surfaces can you mount GoPro to?

Mount your GoPro to both curved and flat surfaces, like helmets and skateboards.

How does QuikCapture work?

QuikCapture lets you start capturing video or time lapse photos with the press of a button. The camera automatically powers off when you stop recording. So, using this feature is a great way to save battery life.

What is QuikCapture video?

QuikCapture lets you start capturing video or time lapse photos with the press of a button.

How to update GoPro software?

Visit gopro.com/update and download the software directly to your microSD? card.

Why use mounts?

Use mounts to capture creative perspectives and a variety of shots.

Can you use GoPro in water?

Be sure the doors are closed before using your GoPro around water, dirt or sand.