how to sync multiple cameras


how to sync multiple cameras插图

Thecomputer methodis the most precise and reliable way to sync multiple cameras. Using the manufacturer’s software, you connect your camera to your computer and sync the camera clock to the computer’s clock. Each camera will be perfectly synced (hour/minute/second).

How do I sync audio from one camera to another?

You can also utilize Audio Sync, a built-in tool available in Davinci Resolve, which we will run through in steps below. If you need to change the angle you chose, right-click on the clip you want to change, select Switch Multicam Angle Clip select one of the other camera angles. Sync files using Audio.

How do I connect two cameras to each other?

Connect the primary camera's pin 3 (red wire, output) to each secondary camera's pin 4 (green wire, input). Connect the primary camera's pin 5 (brown wire, ground) to each secondary camera's pin 5 (brown wire, ground). ORX cameras have a 12-pin GPIO. It has two non-opto input/output pins that can be used as either input or output.

How do I use multiple camera angles in a video?

With audio, it’s simply a case of dragging the different camera angles into your media pool, selecting them all and choosing “Create new multicam clip using selected clips…” from the right click menu. When the dialogue box pops up, just tell it to use the sound for the “Angle sync”.

What is a multi camera auto sync tool?

MULTI-CAMERA AUTO-SYNC TOOL. Syncaila is a professional tool for video editors, which performs fully automatic synchronization of video and audio footage from multiple cameras and recorders.

Setting The Time On Camera

The easiest method to sync multiple cameras is to have each photographer hold his/her camera, get into the camera menu and set a specific time. It’s fairly easy to do so. For instance, on Nikon DSLRs you can change time via Setup Menu>Time Zone And Date or Setup Menu>World Time>Date and Time.

Photographing A Clock

Another useful method is to photograph a clock that displays hour, minute and second. In this case, the precise settings don’t matter – you just need to point each camera at the same clock and take a photo. You will have a photo of the actual time in every camera so that you can readjust the recorded time in post-processing.

Repeating The Process For All Cameras

In case you don't see the image of the clock, you did something wrong and you should repeat the process until you get it right. But since this method is fairly simple, you probably won’t have any issues. You should repeat the same steps until all the cameras are synced to the correct time.

Further Resources

Jasenka is a photographer with a background in web design. You can find out more about her on her website, see some of her newest images at 500px or get to know her better here.

How to edit a multicam sequence?

From there, editing the multicam sequence is the same for both. Simply drag the multicam clip into your sequence, tell the preview window that you’re looking at a multicam clip, and you can click away while you play back the footage automatically cutting up the sequence as you go.

Is automatic syncing for multicam reliable?

It looks like automatic syncing for multicam has become much more reliable now , though.

Can you hear a video without audio?

Without audio, there’s a slight change. Because there’s no way for the software to “hear” where the clips match, we have to give each clip a visual signal to be able to tell Resolve where they line up. The only real difference between the two methods is that here, we have to look for this visual signal ourselves and then tell Resolve where it is.

How many steps are there to configuring synchronized capture?

There are two steps to configuring synchronized capture:

What is synchronized capture?

Synchronized capture is when two or more cameras are capturing images at the same time; our definition of "the same time" is that the cameras must take start exposing each set of images within microseconds of each other. To achieve this, we show how to use one "primary" camera to trigger one or more "secondary" cameras, ...

What connector does a bfly camera use?

BFLY cameras use a 6-pin GPIO connector. The BFLY GPIO has only opto-isolated output pins, so the primary camera requires a pull-up resistor to strengthen its strobe signal.

How many pins does an ORX camera have?

ORX cameras have a 12-pin GPIO. It has two non-opto input/output pins that can be used as either input or output. Non-opto pins do not need a pull-up resistor combination to strength the strobe signal. This example uses the non-opto pins.

What pin to connect a 10 k resistor to a camera?

Connect one end of a 10 kΩ resistor to the primary camera's pin 3 (red wire, 3.3 V output).

How many pins does a CM3 have?

CM3 uses a 9-pin GPIO. It has two non-opto input/output pins that can be used as either input or output. Non-opto pins do not need a pull-up resistor combination to strength the strobe signal. This example uses the non-opto pins.

How to match audio in a video?

Right-click your file in the timeline and hit Switch Multicam Clip Angle > choose the clip you want to match the main audio (you can also use this option for audio if you have more than one recording).

How to edit multiple cameras?

Part 1: General Tips & Tricks for Multicam Editing 1 Make sure all your cameras have the same frame rate while shooting. 2 Make sure each camera’s audio is adjusted to a good audio level; use a lav mic as needed. 3 To sync up your audio while shooting, use an audio/visual cue such as a clapper board or an on-camera clap to spike the audio on all your recording devices. This will make it easier to sync your audio with your footage in post. 4 If the audio files do not line up, right-click on your multicam footage and select Open in Timeline and then find the spot you can align the audio and video files accordingly. 5 You can also utilize Audio Sync, a built-in tool available in Davinci Resolve, which we will run through in steps below. 6 If you need to change the angle you chose, right-click on the clip you want to change, select Switch Multicam Angle Clip > select one of the other camera angles.

How to align audio and video on a multicam?

If the audio files do not line up, right-click on your multicam footage and select Open in Timeline and then find the spot you can align the audio and video files accordingly.

How to sync audio while shooting?

To sync up your audio while shooting, use an audio/visual cue such as a clapper board or an on-camera clap to spike the audio on all your recording devices.

Can you edit multiple cameras in Davinci Resolve 17?

But with the right multicam editing tools currently available in the new Davinci Resolve 17 update , this seemingly complicated workflow can now be significantly reduced.

How to create a multicamera sequence?

To use the Create Multi-camera Source Sequence dialog box, select your clips or bin from the Project panel. Then, right-click (Windows) or Ctrl-click (Mac OS) the selected clips and choose Create Multi-camera Source Sequence from the context menu.

What is sequence preset?

The sequence preset Automatic is selected by default. When you select the Automatic preset, the video preset is based on the video format of the Camera one clip. In most scenarios, the Automatic preset is the appropriate setting. For advanced workflows, like editing a sequence using proxy resolution clips, you can choose a specific sequence preset. You can then use higher-resolution/frame-size clips for the final edit.

How to add a project to Premiere Pro?

Click New Project from the Premiere Pro Welcome screen, or select File > New Project.

What is the multi camera mode in Premiere Pro?

Premiere Pro lets you organize and select the angles to view in the Source Monitor's multi-camera mode.

What is multi camera mode?

In the Multi-camera mode, you can view the footage of all cameras simultaneously and switch between cameras to choose footage for the final sequence.

How to create a target sequence in Premiere Pro?

To create a target sequence, with the multi-camera source sequence selected in the Project panel, choose File > New > Sequence From Clip. You can also right-click (Windows) or Ctrl-click (Mac OS) on the multi-camera source sequence and select New Sequence From Clip from the context menu. Premiere Pro creates a multi-camera target sequence, ...

What is sequence settings?

Sequence Settings determines how the audio tracks in the source sequence are populated, how the panning and channel assignments are set, and whether they are muted.

What is Syncaila interface?

Syncaila presents a user-friendly, streamlined and informative interface specially designed for synchronization purposes.

Why is Syncaila important?

The purpose of Syncaila is to free an editor from manual synchronization when dealing with multiple takes from multiple cameras and recorders. It saves a lot of time and effort for maximum concentration on creative editing tasks .

How long is Syncaila trial?

Syncaila has a trial period of 20 days without limitations on the functions and capacity of synchronization as if it were a full registered version.

How many seconds are inaccuracies in media files?

Even the media files that do not have an audio track are placed with a very small inaccuracy – less than a second!

Is Syncaila safe?

All versions are codesigned by verified developer and absolutely safe! The Windows SmartScreen warning is misleading. If in doubt, follow the link to Softpedia, which tests every new version of Syncaila.

Does season license require internet?

SEASON license requires Internet on every run. Other licenses require Internet on activation and update only.

Can you upgrade Syncaila?

Unlimited upgrade to the latest version of Syncaila. All subsequent versions without additional fees.