how to setup netgear wireless cameras


how to setup netgear wireless cameras插图

How do I connect to my Netgear WiFi extender?

Connect your computer or mobile device to the extender's WiFi network. The extender's default WiFi network name (SSID) is NETGEAR_EXT. The extender network either has no password or the default password is password.

What is the IP address of my Netgear camera?

The local IP address is what you see from inside your home on the LAN (local area network) and is typically 192.168.0.1 for a Netgear router. You can't use that to view your camera from the Internet as that can only be accessed from the LAN.

Why can’t I access my Netgear camera from another computer?

That’s all there is to it. You router should now be configured so you can access your camera externally. You should try it from the internet to see if it works! Netgear routers do NOT support NAT Loopback. Put simply, this means that you cannot test your EXTERNAL or WAN address from a LOCAL computer.

How do I install my extender using the Netgear Nighthawk app?

How do I install my extender using the NETGEAR Nighthawk App? For all other extenders, we recommend the following instructions. To set up your extender: Plug in your extender. The Power LED lights. If your Power LED does not light, press the Power or On/Off button. Connect your computer or mobile device to the extender's WiFi network.

Why do Arlo cameras need to connect to the base station?

Because of that, Arlo cameras need to connect to the Base Station, which in turn communicates with your home’s Wi-Fi network.

How far away from the base station can you sync your camera?

Make sure your cameras are within a couple of feet of the Base Station during the syncing process (you’ll be able to move them farther away afterward, of course). Hit “Continue” in the app.

How long does it take to setup Arlo?

Even though you have to use the Base Station, the setup process is pretty painless and only takes about 10 minutes. To start off, download the Arlo app to your smartphone. It’s a free app that’s available for iPhone and Android devices.

Do you need to plug in an Arlo Pro?

One thing that separates the Arlo Pro from other Wi-Fi cameras is that it’s battery-powered, meaning you don’t need to plug it into an outlet to stream and record video.

Can you disarm a motion detector?

On this screen you can arm or disarm the system, which is really nothing more than just turning the motion and audio detection on or off.

What is IP camera?

In the example below, an IP camera is connected to the network on the secure (LAN) side of the router, and Port Forwarding is configured so that the camera be accessed by a smartphone connected to the Internet at a different location.

What is port forwarding in firewall?

This is called "Port Forwarding", "Opening a Port", "Opening a firewall pinhole", or "Creating an inbound firewall rule". They all mean the same thing.

Does MAC address change?

It is recommended to use the MAC Address identity, as it does not change. The MAC Address of most devices is printed on an attached label. In the case of our smartphone IP camera, it was available in the network settings screen. In this example, the Smart Phone MAC Address is "E8:99:C4:AA:55:B5" :

Does Netgear DGND4000 have DSL?

NETGEAR DGND4000 genie router connected to DSL Internet connection. These instructions apply to most NETGEAR routers or gateways with the genie user interface, although the screens and menus might vary slightly between models and firmware versions.

Does Netgear router work with games?

While most games, applications and devices that require internet access will work perfectly with the default settings of your NETGEAR router, some may require extra configuration of the router to work correctly. This usually involves allowing incoming traffic from the internet on particular “ TCP port numbers” that are specific to each application.

What is UPNP camera?

UPnP is simply a tool to help the setup of port-forwarding rules automatically. If it's not working you can add the rules yourself. The guide above shows you how. If your camera is on the default port 80 then substitute the port number 4440 above for 80.

How many IP addresses does a router have?

Routers have 2 IP addresses, the local address and the public address. The local IP address is what you see from inside your home on the LAN (local area network) and is typically 192.168.0.1 for a Netgear router. You can't use that to view your camera from the Internet as that can only be accessed from the LAN.

What port is my router on?

Your router is on port 80 so you need to choose a different port number. additioanlly, be sure that the camera is on a static local IP address and you confirm you can access the camera on the local address.

How to add inbound service to router?

Click the ‘add’ button under the ‘Inbound Services’ table to add an inbound service. (this means that the rule applies to any traffic coming into the router from the internet).

What is the default password for my router?

If you haven’t changed your login details (and you definitely should) the default username is ‘admin’ and default password is ‘password’.

How to change port number on a camera?

To change the port number enter the setup pages of each camera and on the first page (network settings) click on the link that reads "static". This will display that camera's local IP address and the top entry is the port number (which will be on port 80 by default). 2) Then set up a service for each port in your router.

What to do if your camera is dynamic?

If it is dynamic, investigate a DynamicDNS service. Most cameras and routers support this.

How far away should I place my Arlo camera?

Place your Arlo cameras at 10 feet (300 centimeters) away from the base station, and allow at least 6½ feet (2 meters) between cameras. Follow these guidelines to prevent WiFi signals between the devices from interfering with each other. Position Your Camera to Optimize Its Field of View.

How to find out if Arlo is updated?

sure that you are using the latest version. To find out if an update is available, go to the app store and search for Arlo.

How to connect a base station to a router?

1. Connect the base station to your router using an Ethernet cable. 2. Connect the AC adapter to the base station. 3. Plug the AC adapter into an electrical outlet. 4. If your base station includes an On-Offbutton on the back, press the button.

How far away should I place my camera from my base station?

To prevent signal interference, place your cameras at least 10 feet (3 meters) from the base station, and allow at least 6½ feet (2 meters) between cameras.

How far away from a camera can you detect motion?

The best area for motion detection is 5 to 20 feet (1.5 to 6 meters) from the camera position. You can use the Motion Detection Test to verify if motion can be detected in a camera’s current placement. The camera’s LED blinks amber when motion is detected.

How long does it take for a power LED to turn green?

The Power LED and Internet LED light green in about two minutes.

What does it mean when the camera is in position mode?

This means that you might see lower-quality video while the camera is in Position mode. 4.