how to reset wisenet camera


how to reset wisenet camera插图

How do I default my Wisenet camera?Locate the reset button.Hold the reset button for 5 seconds while the unit is powered (not during bootup.)Once released,the unit will reboot on its own.It will then reset all settings in the camera,including the IP address,to 192.168.Connect to the unit via Chrome or the Wisenet Device Manager.

How do I reset the camera to default settings?

Here are the steps to reset it: 1 ?Open the camera and locate the reset button 2 Press and hold the button for 5 to 20 seconds 3 Wait until you hear a click sound 4 Release the button More ...

How do I reset a wisnet PTZ camera?

Here's the process to reset a Wisnet PTZ camera... Pull the lid to locate the reset button The PTZ has a motor and a fan inside and you can hear the sound of the device working and can also feel the vibration of the camera's body. It's easy to identify when the camera reboots.

How do I factory reset my Hanwha network camera?

Applies to Models: Hanwha network cameras. All form factors There usually are two instances (loss of credentials or unresponsive device) when you will need to factory reset your camera using the physical reset button. The below article will go over this process. 1. Locate the reset button.

Where is the reset button located on the camera?

As you can see, the reset button is inside the camera close to the SD card slot. Open the camera and locate the reset button The process is very similar to the PTZ's reset. Here's the list of the Fisheye cameras.

How to reset Wisenet camera?

To reset a Wisenet camera press and hold the reset button for 5 to 20 seconds (depending on the model) and wait for the LED to blink to indicate that the process is completed. The camera reboots and loads the factory default configuration., After the reset, you can start the setup all over again. Here are some examples of how to reset different ...

What is a PTZ camera?

PTZ cameras. The PTZ (Pan, Tilt, Zoom) cameras are very common in big surveillance projects and are usually installed in high places that are hard to reach. Luckily, if you need to reset the camera, you don't need to remove it from its place to be able to reach the reset button.

How to know if your computer is reset?

At first, you can just press and hold and wait for something to happen, either a click sound or blinking LED will indicate the reset is done.

Does a PTZ camera have a fan?

The PTZ has a motor and a fan inside and you can hear the sound of the device working and can also feel the vibration of the camera's body.

Can a fisheye camera see 360o?

The fisheye camera can see everything in 360º and that's awesome. But as any device sometime you have to reset it and it's necessary to open it up as shown in the image below. As you can see, the reset button is inside the camera close to the SD card slot. Here are the steps to reset it:

Who is Claudemir Martins?

Claudemir Martins. Claudemir Martins is a former Samsung Engineer with 18+ experience in the surveillance industry . He has been traveling around 17 different countries to teach people how to design, and install CCTV systems.

Who makes security cameras?

Hanwha Techwin (former Samsung Techwin) manufactures professional and consumer security cameras for different segments of the market.

Minimum Password Requirements

In WISENET WAVE there are a minimum password security requirements for new passwords, including:

To Increase Password Requirement Strength

Although WAVE does not allow users to modify the password requirements, users who us LDAP/Active Directory integration can enforce their own password policy for their own organization.

Resetting a Password

WAVE Sync connected systems can reset their password at any time by using the built-in password reset function.