how to record hikvision ip camera on pc


how to record hikvision ip camera on pc插图

How to configure Hikvision network cameras for Cloud Recording?

Configure HikVision Network Cameras for Cloud Recording, Backup, Monitoring and Playback. Contents. Step 1: Connect the camera to the network and find its IP address. Step 2. Access the Camera's Web-based Configuration Tool. Step 3. Configure the video profile. Step 4. Configure FTP Settings. Step 5. Configure Motion Detection and Snapshots

How do I Find my Hikvision IP Camera IP address?

Download and install the SADP tool in your computer and just open it up to start the Hikvision IP camera configuration process. If your IP camera is correctly connected to your network it might get an IP from your router. If it doesn't, you can find the camera with its default IP address which is 192.0.0.64.

How to use Hikvision SADP tool to configure Hikvision IP camera?

How to use Hikvision SADP tool. Download and install the SADP tool in your computer and just open it up to start the Hikvision IP camera configuration process. If your IP camera is correctly connected to your network it might get an IP from your router. If it doesn't, you can find the camera with its default IP address which is 192.0.0.64.

Is Hikvision IP camera/DVR compatible with cameraftp VSS software?

HikVision IP Camera / DVR is compatible with CameraFTP VSS software. Using CameraFTP VSS with HikVision IP Camera is easier to setup than uploading directly from the camera; also, CameraFTP VSS supports both image recording and video recording. The disadvantage is it requires a PC and CameraFTP VSS Software must be always running.

How to access Hikvision camera?

Open the camera via a web browser. After configuring the Hikvision IP camera address , just open a web browser such as Google Chrome, Mozilla Firefox, or Internet Explorer and type the camera IP address in the URL bar . If this is the first time you are trying to have access to a Hikvision camera, your browser will ask you to install a plugin ...

What is the IP address of Hikvision?

The picture shows that the SADP tool found the Hikvision IP camera in the network and the IP is 192.0.0.64, the communication port is 8000.

What is the IP address of a camera?

If it doesn't, you can find the camera with its default IP address which is 192.0.0.64. You can see that in the SADP tool.

What does PoE stand for in camera?

I put it there to let you know the camera is powered up by the UTP (network cable), so there's no need for an extra power supply. PoE stands for Power Over Ethernet and that's a universal standard to send power to IP devices.

Does Hikvision require a plugin?

If this is the first time you are trying to have access to a Hikvision camera, your browser will ask you to install a plugin (see the picture below).

How to open command prompt in Windows 10?

Click on the windows search bar, type CMD, and click the Command Prompt.

Is it rocket science to configure an IP camera?

No worries, configuring an IP camera is not rocket science. There are a lot of different IP camera brands out there, but the configuration process is similar to all of them. In this article, I will teach you how to configure Hikvision IP camera.

What does it mean when a camera is inactive?

This just means that a password has not yet been set on the camera. You can activate the camera through SADP by selecting the camera and then entering and confirming the password.

How to log in to Internet Explorer with admin username?

Enter the IP address into the address bar of internet explorer and log in with the admin username and password.

Does Hikvision require a large recorder?

Every now and then you may have a situation that arises where your client does not require a large recorder (NVR/DVR).#N#There is now a variety of Hikvision IP Cameras that can operate as a standalone system with an SD card used for the recording instead of a traditional recorder.

Can a camera record on an SD card?

Now whenever the camera detects motion, it will start recording onto the SD card.

How to enable Hikvision CGI?

To add an ONVIF user account, click the Configuration tab, then click Network -> Advanced Settings, then click Integration Protocol. Please check the checkboxes of "Enable Hikvision-CGI" and "Enable ONVIF". For Hikvision-CGI Authentication, please select "digest/basic". Now, click the "Add" button to add an ONVIF user as shown below. You can name the user as "onvifuser".

What is Hikvision security camera?

Hikvision is one of the largest security camera manufacturers. They have many different camera/DVR models similar to TRENDnet. Many of their cameras are designed for out-door use. They support image/video resolutions of 2048x1536, 1920x1080 and 1280x720 or higher resolutions.

How to configure motion detection?

If you ordered a plan with motion detection enabled, then you must configure motion detection with your camera. Click Configuration --> Advanced Configuration --> Events --> Motion Detection. You will see the screen as shown below:

How to find IP address of Hikvision camera?

You will need to use the manufacturer's software to find the camera's IP address. After that, you need to launch a browser to access the camera's configuration website. For more detailed info, you can read Hikvision 2 Series Camera Manual .

How to connect Hikvision camera to network?

Step 1: Connect the camera to the network and find its IP address. Insert the Setup CD, follow the instructions to connect your camera. Many Hikvision outdoor models support PoE. So usually you need a PoE switch, or you need a compatible power adaptor.

Can Hikvision cameras upload to FTP?

You can also download CameraFTP Viewer App for iOS and Android. Note: Hikvision cameras cannot upload video clips to FTP server directly. To upload video clips, you can use CameraFTP VSS on a PC.

Does HikVision work with VSS?

It can display live camera videos on your computer screen, while also recording the video/image to the cloud (and the local disk). HikVision IP Camera / DVR is compatible with CameraFTP VSS software. Using CameraFTP VSS with HikVision IP Camera is easier to setup than uploading directly from the camera; also, CameraFTP VSS supports both image ...

What resolution is Hikvision?

Many of their cameras are designed for out-door use. They support image/video resolutions of 2048x1536, 1920x1080 and 1280x720 or higher resolutions. All of their cameras can upload image snapshots to a cloud FTP server. It seems most of their cameras support CameraFTP VSS. With the help of CameraFTP VSS software running on a PC, they can upload video clips to the cloud.

How to find IP address of Hikvision camera?

You will need to use the manufacturer's software to find the camera's IP address. After that, you need to launch a browser to access the camera's configuration website. For more detailed info, you can read Hikvision 2 Series Camera Manual .

How to connect Hikvision camera to network?

Step 1: Connect the camera to the network and find its IP address. Insert the Setup CD, follow the instructions to connect your camera. Many Hikvision outdoor models support PoE. So usually you need a PoE switch, or you need a compatible power adaptor.

How to configure motion detection?

If you ordered a plan with motion detection enabled, then you must configure motion detection with your camera. Click Configuration --> Advanced Configuration --> Events --> Motion Detection. You will see the screen as shown below:

Can Hikvision cameras upload to FTP?

You can also download CameraFTP Viewer App for iOS and Android. Note: Hikvision cameras cannot upload video clips to FTP server directly. To upload video clips, you can use CameraFTP VSS on a PC. These cameras are compatible with VSS-based Live View, Cloud Recording and Local Recording.

Can you upload video clips to CameraFTP?

This camera can only upload image snapshots and not video clips. CameraFTP has viewer apps that can play the recorded image snapshots just like video clips. If you ordered a video plan, you need to: (1) order a new image plan and cancel the old video plan; or (2) Run CameraFTP VSS on a PC. Do not configure FTP in the camera. VSS can upload video clips to CameraFTP.

Where is snapshot resolution?

The snapshot image resolution is set in the Video section (Video resolution).

How do I view my wireless camera on my computer?

Alternatively, you can view the camera on the browser while using its unique IP address as the URL. In the third way, the trick is to use the generated real-time streaming protocol (RTSP) URL on a compatible media player , like VLC, on the same local network.

How do I connect my wireless camera to my laptop?

So, to connect a wireless camera to a laptop, you’ll use either the Client or the browser as shown in our two setups. If not that, you can use an emulator like Bluestack to download the smartphone app of that camera. The camera app should work just like with your phone, only on a larger display.

How to set up a wireless camera?

So, on the Web Configure window, click Network>WiFi Security>WiFi Scan. Then, select your WiFi SSID (WiFi name), enter the password, and click the “Save and Apply” button.

What does it mean when a WiFi camera is a success?

If your camera WiFi test is a success, it means the configuration setup was successful. So, you can now unplug the Ethernet cable connecting the camera to the router. Then, go back to the Client software home and double-click the camera to reconnect it.

How to connect a camera to a router?

After a successful login, click the “Configuration” tab, then go to Network>Advanced Settings> Network>WiFi. Select your WiFi name, key in the password, and click the “Save” button. Now your camera can connect to the router wirelessly. So, you can unplug the Ethernet cable.

What frequency does a wireless camera use?

The transmitter here comprises an access point at either 2.4GH or 5.8GHz frequencies. It can also be analog radio frequencies (RF) like those used by the traditional baby monitors, or else WiFi access points.

How to configure webcam?

When your camera appears, right-click its ID name and select “Web Configure”. The device will ask for the administrator login credentials, namely the username and password. If it’s a new camera, you’ll use the default username and password listed on the user manual that came with the system

What is HikCentral Enterprise?

HikCentral Enterprise – Commercial is a central management platform for commercial buildings that integrates security information by unifying video security, access control, parking lots, and other systems.

What is T Vision software?

T-Vision mobile client software can be used to configure the device parameters, adjust the settings of the live view, as well as capture pictures and record video footage.

What is HikCentral Professional?

HikCentral Professional, an integrated security software, is designed to meet versatile security challenges in one intuitive platform.

What is Hik Connect Mobile Software?

Hik-Connect Mobile Software has been designed to help small businesses effectively operate and manage security devices from a smartphone or tablet.

How long is the free trial for video surveillance?

Get a 30-day free trial of the leading video surveillance software and experience all the benefits of a great central management system.

Do I need a NVR for my IP security camera system?

A NVR is not necessary in order to view your network cameras or even record video. If you are testing cameras, looking for a temporary setup or want to set up something inexpensive then using a computer with an IP camera is a good alternative to a NVR. SmartPSS is our computer software program that allows PCs to view and record IP cameras. However, this kind of processing will demand a lot from the computer. Most likely, you wouldn’t be able to use that computer for personal use as it would be bogged down processing video from high resolution IP network cameras. Also, computers can be unreliable and crash, potentially leaving you with no recorded video.

How to connect IP camera to PC?

Three ways to connect an IP camera to a computer 1 12V DC power adapter with a network cable straight into a PC 2 12V DC power to camera + network cable to router 3 Camera to PoE Switch or PoE Injector

What is PoE camera?

Before we begin, it is important to understand that network camera systems require the ability to transport video and power to work correctly. Power Over Ethernet (PoE) is a technology that transmits video/data signal and power over one Ethernet cable. In situations where PoE isn’t available, a 12V DC power adapter will be necessary to supply power to the camera.

What is an IP camera NVR?

A NVR, or Network Video Recorder, is the device that IP cameras connect to. The NVR records video provided by the IP cameras to a hard drive, either in HD (720p, 1080p), 2K HD, or Ultra HD (4K) depending on the type of NVR and type of camera that's being used with it. IP cameras are network-based cameras, however they don’t require Internet access ...

What is NVR security?

NVR products are standalone devices using a Linux operating system which is known to be rock-solid and crash free, and designed to be operate 24/7 and maintain system security with user account access permissions. For a complete security camera system, you will want to use a NVR along with cameras.

How to power a camera with 12V?

a) Connect a 12V DC power supply to your camera and connect the power adaptor to the wall to power the camera.

What is the IP address of a security camera?

The camera currently has an IP address of 10.1.1.65. As explained in our article connecting security cameras to the internet, for the camera to be reachable from the computer on your network, its IP address has to match the IP scheme of your network. In our case our router IP is 192.168.1.1, so we are going to have to change the IP address of the camera. To change the IP simple press the pencil icon to edit.